A pellet mill polyethylene cooler is very important equipment when it comes to cooling pellets before packing them to the required polyethylene bags. In other words, a pellet mill polyethylene cooler helps in controlling disfiguration of the bags which in return would cause weakening thus altering the entire packaging process. The cooler diminishes the excessive heat that would be catastrophic to the entire procedure. Generally, when the heat is not cooled, it leads to weakening of the polyethylene bags and thus the standing benefit of the coolers.
After a successful palletizing procedure, the biomass pellets are usually too hot to be packed, this means the next stage would comprise of introducing temperatures that are regulated to a certain degree. Because of the moisture content which is also high when the temperatures are high, cooling becomes a necessity, not only to protect the polyethylene bags but also to maintain a proper quality of the pellets. This means that the benefits of the pellet mill polyethylene coolers in this case would include reducing moisture content as well as cooling the excess heat.
Airtight bags can be dangerous especially when it comes to excess moisture which can be trapped inside if not cooled off. In most cases, it leads to mildews which lead to poor or reduced quality of the pellets. Bad pellets or mildew affected pellets would not gain attention in the market; in fact, those are usually categorized within the losses section. Your pellet mill is supposed to bring you profits, not lead to losses therefore gaining the required knowledge in milling enables you to enter the market with a strong will of success.
The cooler works by blowing in cold air to the pellets in order to bring them to the required room temperature allowing them to cool down fast whereas at the same time getting rid of the excess moisture.