Pellet Mill Ash – How to Reduce the Amount

If you want to create and manage your very own pellet mills, a good guidance can go a long way in making sure that you will do things properly. One of the most important things to take into consideration is the pellet mill ash. The amount of ash that is produced by the pellet mills says a lot about their efficiency. This means if the pellet mills are efficient, then the ash that is produced will be low. This should be your goal when you first plan to create the mills. Reaching that objective will not be hard if you follow the guide below.

The ash produced by the pellet mills will depend on the type of woods. For example, more ash will be produced by softwood pellet. This is also the case with softwood logs. On the other hand, a small amount of ash will be produced by hardwood pellet. Remember that this is always the case regardless of the heat level during production.

What if your materials are mostly softwood but you want to reduce the amount of ash? This is not at all impossible to do. The key lies in the compression process. If you apply hard compression to the softwood pellets during production, this will help increase the density of the softwood pellets making them similar to hardwood ones. The end result will be a reduced amount of ash. Remember this little tip if you want to improve the efficiency of your pellet mills and produce better quality pellets.

Another thing to keep in mind if you want low pellet mill ash is to check the pellet fuel of pellet stove you buy from your local stores properly. By properly checking the pellet fuel, you can avoid getting fuel that will produce more ash. The trick is to look at the bottom part of the pellet fuel bag. If you notice a large amount of dust, then it is likely that the fuel will produce high amount of ash.

Related Posts

Send Enquiry