Producing a quality pellet requires more than just good knowledge, but you also need to use the right tools. To bind the raw materials, a strong mechanical pressure is mandatory. In addition to that, you need to make sure to keep the moisture of the content to a minimum, since it can negatively affect the quality of the pellet. There are many pellet mills that you can choose from; from pellet mill aluminum to one that is made from wood. These are some more general information on pellet mills and how to make the perfect pellets. The tips below will help you get the best out your pellet mills.
If your intention is to create the best biomass pellets, you want to ensure that the materials are of similar size. If there are any shavings, they can block the feed mechanism. And in the case of larger chips, they can even result in mechanical failure of the pellet mill. If you are making straw, remember to chop the material first in order for it to flow smoothly into the hammer mill. For large size materials, it is recommended to granulate or mill them down first so that they are small enough to be processed through.
Pelleting various types of hard of soft woods is quite possible via a single Die. When it comes to the quality of the compression, you simply need to control it by adding pellet binders and water. It is important to note though that different materials will need different additive levels. This is the reason why you should always prepare materials that are similar in quality and shapes. You will have a difficult time controlling the quality of the pellets if the materials are constantly vary in quality, shape and size. If the sizes and shapes vary too much, it is harder to control the results and you may end up with pellets that are too hard.
Hopefully the explanation above gives a bit more understanding on how to use your pellet mill aluminum or wood one.